Turbobikes.org
May 22, 2012, 04:45:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please email admin if waiting approval to this site
email is cdhoroho at turbobikes.org
 
   Home   Help Login Register  
Turbobikes.org > Technical > Naturally Aspirated  > measuring clearance
Pages: [1]   Go Down
  Print  
Author Topic: measuring clearance  (Read 799 times)
0 Members and 2 Guests are viewing this topic.
kawaking
Prostreet/grudge racers
Hero Member
***

Karma: +0/-0
Offline Offline

Posts: 328
« on: September 09, 2009, 07:57:14 AM »
How do you measure the clearance between the valve guide and the valve retainer  with higher lift cams ?

please help !

thx guys !
Logged
sportbikeryder
The Inclusive Squad
Hero Member
*

Karma: +0/-0
Offline Offline

Posts: 353
« Reply #1 on: September 09, 2009, 08:50:04 AM »
Assemble and measure how much the valve will lift with a dial indicator before contacting. It will be much easier if you put a light spring in.
Logged
kawaking
Prostreet/grudge racers
Hero Member
***

Karma: +0/-0
Offline Offline

Posts: 328
« Reply #2 on: September 09, 2009, 09:49:57 AM »
ok so assemble it with a light spring in place let the cam push it down put a dial gauge on it put it at zero and I will push with my finger until it stops and read dial gauge Huh?Huh?

just to make sure !

thx

Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 :: SMF hosting by SiteGround :: SMF © 2006-2007, Simple Machines Valid XHTML 1.0! Valid CSS!