Fuel pumps

[Dan.J]

Whats the best pump that draws low amp's and looks nice that will feed 300/400hp.....400 being more than I will ever make. Plan to mount it under the tail. I like the Weldon 600A but cant find many that use it and it might be a touch to long to fit sideways under there Pump needs to use AN fittings.
Also....filter before pump or after? And what to use?
 Thanks

[Chris Horoho]

that pump should fit in the same place i had my old one mounted (same pump as now and similar location
youll need the 90 deg fittings like mine had


see attached pic for location mounting

this was a 700 hp efi pump from aeromotive
it has a little higher amp draw then most though
that would be my big worry with the weldon but they seem to usually be a little lower on the amp draw then others

[Chris Horoho]

i also put my filter right before the 90 going into the pump

[Chris Horoho]

here is a chart of the performance of the weldon 600a

http://www.hrpworld.com/client_images/ecommerce/client_39/products/pdf_6069_2.pdf

[Dan.J]

Im starting to think that just a simple Walbro 255 external might would be smarter for what I have...Attic dogs looks good under there. How are the Walbro's in amp draw? What would be a good filter for before the pump? I see like 100micron all the way down to like 10micron

[Chris Horoho]

i have heard a lot of good on the walbros for the mid to lower power setups
with little or no problems

[Rev Rider]

I'm running the MSD 2225 pump... it's overkill for me, but probably about right for you.  Not sure what it draws, but I've run one for over two years and 40k miles without trouble.
http://www.jegs.com/i/MSD/121/2225/10002/-1?CT=999

[SHOYASS]

I'm running the MSD 2225 pump... it's overkill for me, but probably about right for you.  Not sure what it draws, but I've run one for over two years and 40k miles without trouble.
http://www.jegs.com/i/MSD/121/2225/10002/-1?CT=999

X2 Have on on my 1000 and the one I just finished. No problems

[buzard]

I'm running the MSD 2225 pump... it's overkill for me, but probably about right for you.  Not sure what it draws, but I've run one for over two years and 40k miles without trouble.
http://www.jegs.com/i/MSD/121/2225/10002/-1?CT=999

that will do it.

[Moparict]

Thats what I'm running also.