Turbobikes.org
May 23, 2012, 07:58:02 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Chat Room
 
   Home   Help Login Register  
Turbobikes.org > Technical > Turbo > Turbo Install......HELP PLEASE
Pages: [1]   Go Down
  Print  
Author Topic: Turbo Install......HELP PLEASE  (Read 649 times)
0 Members and 1 Guest are viewing this topic.
1slowBUSA
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« on: January 01, 2008, 04:42:10 AM »
so as i posted b4 the site crashed i was having problems clearing the tire and the turbo, and i was wondering if i take it to a shop to heat it up and bend it back a little bit would that work
heres the pix by the way
i heard from ppl that their turbo was closer than that or they have seen closer, and i was just worried


Logged
Gsxturbo
Skeet
Administrator
Hero Member
*****

Karma: +6/-0
Offline Offline

Posts: 672
« Reply #1 on: January 01, 2008, 06:37:07 AM »
I wouldnt go heating the header up and bending it you might end up kinking or cracking the header .If it was me i would cut the turbo flange and angle it back a hair and re tig it back on to get plenty of clearance.

Did you try loosening the bolts and tightening the lower ones first?

How much is the bike lowered?

Also the 12/60/17 tire will gain quite a bit of clearance on the turbo i did a 05 1000 and we thought it was going to hit but after we put the shinko on it has been just fine for 5000 miles so far.
Logged
OzBooster
Sr. Member
****

Karma: +1/-0
Offline Offline

Posts: 171
« Reply #2 on: January 01, 2008, 05:06:34 PM »
Be aware if you change the turbo position associated up pipes & exhaust will need to be changed too.
Logged
Dan.J
BOOM!!!!!
Global Moderator
Hero Member
*****

Karma: +71/-0
Offline Offline

Posts: 464


WOOSH!
« Reply #3 on: January 01, 2008, 07:30:27 PM »
hi OZ....glad to see ya here!
Logged


06 Busa ......8 sec. streetbike
OzBooster
Sr. Member
****

Karma: +1/-0
Offline Offline

Posts: 171
« Reply #4 on: January 02, 2008, 04:05:14 PM »
Chris is pretty good at getting the message across  Wink
Logged
Dan.J
BOOM!!!!!
Global Moderator
Hero Member
*****

Karma: +71/-0
Offline Offline

Posts: 464


WOOSH!
« Reply #5 on: January 02, 2008, 05:16:14 PM »
ya i figured! Wink
Logged


06 Busa ......8 sec. streetbike
02gsxr600
slow 600
Sr. Member
****

Karma: +1/-0
Offline Offline

Posts: 155
« Reply #6 on: January 06, 2008, 01:37:48 AM »
That is too close for comfort
Logged
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
****

Karma: +7/-0
Offline Offline

Posts: 261
« Reply #7 on: February 18, 2008, 08:28:20 PM »
Is it me or is that turbo way too low?  How is that setup NOT going to smoke?!?!?!?!  The oil return line looks level with ground.  The turbo looks lower than oil level....  Do you guys see what I see?
Logged
JOEY

RCC Stage II BUSA 480HP
RPM Custom BUSA 700HP+
RCC Stage III GSXR1000 310HP
02gsxr600
slow 600
Sr. Member
****

Karma: +1/-0
Offline Offline

Posts: 155
« Reply #8 on: May 03, 2008, 10:27:43 PM »
oh shit well the pump should keep it circulating turbosmiley
Logged
BLACK_DEATH
Hero Member
*****

Karma: +1/-0
Offline Offline

Posts: 472
« Reply #9 on: May 11, 2008, 06:48:30 PM »
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 :: SMF hosting by SiteGround :: SMF © 2006-2007, Simple Machines Valid XHTML 1.0! Valid CSS!