Many thanks to PINKY for the great new site and giving us a chance to advertise!
Cycle-Tek.com is quickly becoming the #1 name in Co2 Air Shifter Systems around the world, approaching 100 complete systems sold! Whether you're simply looking to replace a faulty ignition kill box or convert your air system to Co2, Cycle-Tek.com has everything you need!
Cycle-Tek.com specializes in
complete Co2 air shifter kits and Co2 multi-distribution controls to power your air shifter system, multi-stage boost controllers, pressurize h2o tanks etc...from a single source.
I manufacture the kits myself, including the wiring harness's, machine work and my personally designed Printed Circuit Board technology kill-box. The kill-box contains NO jumper wires, and utilize a PCB edge mount connector...which equals superior reliability and will NEVER throw the FI light. Kill time is adjustable from 50mS-100mS.
The wiring harness is designed around the Hayabusa, but have been used on the GSXR1000, GSXR600 and ZX12. The only modification to the system needed if not used on a Hayabusa is a means to mount the shift cylinder.
If the system is going on a traditional 2 coil ignition, the kill-box can be modified for this application as well. Modification is done by me before shipped, so advance notice is required.
I pride myself in the small details of my system and truly enjoy building them and helping out others, I think of it as therapy
For a detailed explanation of operation, more photos and instructions please visit
All prices do not include shipping and/or paypal fees
NEW RELEASE! 2008 SUZUKI HAYABUSA Co2 AIR SHIFTER SYSTEM!Due to limited space for the traditional 9oz Co2 cylinder, two 3.5oz cylinders are standard with the system. Each full 3.5oz Co2 cylinder is good for around 65 shifts, and they fit perfectly on the right side of the trunk. $365 plus shipping and paypal fees
This is the complete standard kit: $335
Available options and parts sold seperately:
Kill-Box
$95 (no FI light, supplied with terminal block style connector so you can use an existing harness simply by cutting off the connectors and stripping the wires)
Harness Assembly
$25 (Plug & Play, Integrates my kill box to existing wiring harness's,
kill-box not included)
On/off valve Regulator Assy w/ Bottle Pressure Gauge
$8 upgrade or
$118 sold seperately
Dual Low Pressure Regulator On/off assembly (Bottle Mount) for use with air shifter AND boost controllers (comes complete with two gauges, two T fittings and 10' of Nylon tubing) Email
matt@cycle-tek.com for a quote
Dual Low Pressure Regulator On/off assembly (Remote Mount). Comes with everything listed above and 2', 3' or 4' SS -4 feed line.
Triple Low Pressure Regulator On/off assembly for use with air shifter/boost controller/h2o pressure to eliminate the water pump! Used on KENT STOTZ's record setting 1000rr Pro Street Bike! (comes complete with three gauges, three T fittings and 14' of Nylon tubing) Email
matt@cycle-tek.com for a quote
NEW! Remote Mount Multi-Regulated Co2 Manifold System. Email
matt@cycle-tek.com for a quote
Bottle Mounting Bracket (for use with 9oz Co2 bottles and stock undertails only)
Pin Valve Adapter (Converts
bottle to Co2 style thread. EXTREME caution must be used when removing original pin valve! HIGH PRESSURE!)
The systems are built to order, I can make about 2 kits a week, so lead time isn't long.
I provide continual support for everybody, email and phone corrospondence any day of the week, any time of the day.
For further questions and prices feel free to contact me at
matt@cycle-tek.com Thanks again!
