1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
 Offline
Posts: 261
|
 |
« on: January 27, 2009, 09:40:53 PM » |
|
|
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP  |
|
|
Chris Horoho
Pinky
Administrator
Hero Member
Karma: +33/-1
Offline
Posts: 2240
|
|
« Reply #1 on: January 27, 2009, 09:45:29 PM » |
|
sure is pretty
but please try and not shake when snappin those pics lol
|
|
|
|
|
Logged
|
|
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #2 on: January 27, 2009, 09:48:30 PM » |
|
Joey shakes when looking at turbo parts
Thanks for posting them
|
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #3 on: January 27, 2009, 09:52:24 PM » |
|
Sorry about the picture quality, it's actually Tony's fault. He polished the dam thing so much, the I couldn't use a flash. When I tried all I got was a glare.......LOL Low light conditions have that effect. Or maybe it's because it's 35 degrees in my basement now?  Maybe I was SHAKING!!!! LOL |
|
|
|
« Last Edit: January 27, 2009, 10:19:52 PM by 1BADASSBUSA »
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
kurtsbusa
Baconator
Global Moderator
Hero Member
Karma: +13/-0
Offline
Posts: 775
|
|
« Reply #4 on: January 27, 2009, 09:53:32 PM » |
|
It looks nothing like mine (port placement) must of learned somethings after mine
looks good btw
|
|
|
|
|
Logged
|
|
|
|
Chris Horoho
Pinky
Administrator
Hero Member
Karma: +33/-1
Offline
Posts: 2240
|
|
« Reply #5 on: January 27, 2009, 09:59:01 PM » |
|
It looks nothing like mine (port placement) must of learned somethings after mine
looks good btw
yours is also for an ice box unlike this one that uses a heat exchanger so some ports are placed in different places with a fill port |
|
|
|
|
Logged
|
|
|
|
kurtsbusa
Baconator
Global Moderator
Hero Member
Karma: +13/-0
Offline
Posts: 775
|
|
« Reply #6 on: January 27, 2009, 10:02:26 PM » |
|
When are you putting it on?
|
|
|
|
|
Logged
|
|
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #7 on: January 27, 2009, 10:03:48 PM » |
|
soon here is my turbo  I just bolted it up with bolts I had around just to put it together |
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #8 on: January 28, 2009, 04:43:48 PM » |
|
We will be installing this new custom kit soon. Just need to throw my 1397ccRace/Street motor together and install the Twin Entry T71. We are planning to use a set of rods/bolts I have, HD-Main Studs, HD-Head Studs, Spacer, HD-Output Shaft also. This set-up will be controlled by a MegaSquirt unit supplied by Tony. Thanks Tony for all you help in making this dream a reality!!!!!!!! BTW: I found out why it was so cold in my basement. The snow piled up in front of a window pushed the window open after breaking the latch. I guess it happened when I bumped into the snow with my truck....... I am starting to HATE snow!!!!!!!!!  |
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
Chris Horoho
Pinky
Administrator
Hero Member
Karma: +33/-1
Offline
Posts: 2240
|
|
« Reply #9 on: February 11, 2010, 07:54:19 PM » |
|
Here are pics of our new build (Jay & I). Plenum by Tony!!!!
so tell me jay u like this setup still? |
|
|
|
|
Logged
|
|
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #10 on: February 11, 2010, 07:59:34 PM » |
|
I love it!
it great having an intercooled bike that doesnt over heat in traffic
|
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #11 on: February 11, 2010, 08:22:20 PM » |
|
So Jay when are we going to start work on it?
|
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #12 on: February 11, 2010, 08:34:02 PM » |
|
its a long weekend for me this weekend
so I have time
|
|
|
|
« Last Edit: February 11, 2010, 08:47:34 PM by atticdog »
|
Logged
|
|
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #13 on: February 11, 2010, 08:47:57 PM » |
|
sat morning?
|
|
|
|
|
Logged
|
|
|
|
Dan.J
BOOM!!!!!
Global Moderator
Hero Member
Karma: +71/-0
Offline
Posts: 464
WOOSH!
|
|
« Reply #14 on: February 11, 2010, 09:37:30 PM » |
|
Looks good  |
|
|
|
|
Logged
|
  06 Busa ......8 sec. streetbike |
|
|
jdcfrank
Socketman
Site Supporter
Sr. Member
Karma: +69/-0
Offline
Posts: 156
|
|
« Reply #15 on: February 11, 2010, 10:49:15 PM » |
|
Would like to see some better pics. |
|
|
|
|
Logged
|
04 LE Busa, RCC Stage 1, C/M Extended Arm & Billet Slave Support, Smithabusa GPS mod with gear indicator, Harlan Shift Light, Launch Light and Autoshift, Cycle-Tek Airshifter, Welded Clutch Mod w/HD Springs, Puig D/Bubble Screen and lowered.
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #16 on: February 12, 2010, 11:50:16 AM » |
|
Right after the constructions done. Putting up a new wall.
|
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
ACE23
Full Member
Karma: +0/-0
Offline
Posts: 69
|
|
« Reply #17 on: February 12, 2010, 04:59:51 PM » |
|
We will be installing this new custom kit soon. Just need to throw my 1397ccRace/Street motor together and install the Twin Entry T71. We are planning to use a set of rods/bolts I have, HD-Main Studs, HD-Head Studs, Spacer, HD-Output Shaft also. This set-up will be controlled by a MegaSquirt unit supplied by Tony. Thanks Tony for all you help in making this dream a reality!!!!!!!! BTW: I found out why it was so cold in my basement. The snow piled up in front of a window pushed the window open after breaking the latch. I guess it happened when I bumped into the snow with my truck....... I am starting to HATE snow!!!!!!!!! What the equivalent of a Twin Entry T71....as far as Garrett goes? Looks like an awesome setup, very cool you are doing the 1397....any cam, or head work? Very interested in the spool time and power at what boost levels it produces. Do you have any plans to run it on pump gas to see how efficient the A/W plenum is? Hopefully my motor last a LONG time but eventually I want to treat my GT4094 to cams,a 08 crank and 83-84 MM pistons to make it 1400-1441 and just run it on pump gas on the street because thats where I ride 100% |
|
|
|
|
Logged
|
|
|
|
|
BATTMAN
|
|
« Reply #18 on: February 12, 2010, 09:45:19 PM » |
|
Ace, that would be an incredible combination. It will have all the torque you need off boost.
|
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #19 on: February 12, 2010, 11:24:19 PM » |
|
What the equivalent of a Twin Entry T71....as far as Garrett goes? Looks like an awesome setup, very cool you are doing the 1397....any cam, or head work? Very interested in the spool time and power at what boost levels it produces. Do you have any plans to run it on pump gas to see how efficient the A/W plenum is? Hopefully my motor last a LONG time but eventually I want to treat my GT4094 to cams,a 08 crank and 83-84 MM pistons to make it 1400-1441 and just run it on pump gas on the street because thats where I ride 100% It would be about GT45. Head from DaveO, same head as in Charlie's bike, but I had mine coated by Swain. valves & piston also. 2 x intake cams. RCC Ultra Plenum. I plan on shooting for 700HP, 400HP on Pump. I am also planning water/meth injection and shoot for 500HP on Pump. |
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
ACE23
Full Member
Karma: +0/-0
Offline
Posts: 69
|
|
« Reply #20 on: February 13, 2010, 12:38:37 AM » |
|
It would be about GT45. Head from DaveO, same head as in Charlie's bike, but I had mine coated by Swain. valves & piston also. 2 x intake cams. RCC Ultra Plenum. I plan on shooting for 700HP, 400HP on Pump. I am also planning water/meth injection and shoot for 500HP on Pump.
Good god a gt45? That thing is gonna spool at like 8k I bet lol. So it's 1397 and built motor but the dual intake cams and headwork from Dave Owens are the only motor tweaks? I'm confused are you saying you are using an Rcc ultra plenum or the one in your pics here? 700hp should be achievable with that turbo for sure.... Even the 4094 I have has broken 700. On pump gas using 18lb I would think 400hp will come easily also just due to your larger displacement and large turbo..... I'm assuming 500hp on pump will be attempted by spraying water injection and meth above 18lb? Sorry for the questions just find it interesting |
|
|
|
|
Logged
|
|
|
|
ACE23
Full Member
Karma: +0/-0
Offline
Posts: 69
|
|
« Reply #21 on: February 13, 2010, 12:47:29 AM » |
|
Ace, that would be an incredible combination. It will have all the torque you need off boost.
Yes it really would be great for on and off boost power. Since I use such a large frame turbo it produces lower intake temps already not to mention the increased displacement of 1441 from an 08 crank, and 84mm would really help the spool not to mention also some slight head porting and if you added some streetable 385 lift cams. Larger motor, better breathing, big turbo = more power!!! We already know the slight increase in displacement, larger cam profile, and better flowing head that the gen 2 busa has.... Already makes 1-2hp more per lb boost.... You even slightly enhance those on a gen 1 and run a big frame turbo....your likely to see 3hp more per lb boost.... Be nice to make an extra 50 hp at 18lb on pump gas.... Who first want a 425-450hp pump had bike..... But wait let's run some e85 at 22-23lb ut oh there's a 480hp pump gas bike. Of course nine of this has been done to my knowledge but sure seems possible |
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #22 on: February 13, 2010, 10:45:03 AM » |
|
Good god a gt45? That thing is gonna spool at like 8k I bet lol. So it's 1397 and built motor but the dual intake cams and headwork from Dave Owens are the only motor tweaks? I'm confused are you saying you are using an Rcc ultra plenum or the one in your pics here? 700hp should be achievable with that turbo for sure.... Even the 4094 I have has broken 700. On pump gas using 18lb I would think 400hp will come easily also just due to your larger displacement and large turbo..... I'm assuming 500hp on pump will be attempted by spraying water injection and meth above 18lb? Sorry for the questions just find it interesting
1397cc RCC ULTRA Plenum RCC Custom One Off Twin-Entry Header MicroSquirt Secondaries Wossner 3/8" Rods JE 84mm Turbo Pistons R&D Tranny w/ billet 5th & 6th Multi-Stage Lock-up, Billet Baskets Pro-Mod Head & Main Studs APE Lightened & Balanced Crankshaft (good to 14,000 rpms & removed balacer gear) The entire motor is built. Turbo piston pins, V&H Timing Chain, Billet Everything.....LOL Yes, over 18psi I will be shooting water/meth to get approx. 500HP on Pump gas |
|
|
|
« Last Edit: February 13, 2010, 10:55:19 AM by 1BADASSBUSA »
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
ACE23
Full Member
Karma: +0/-0
Offline
Posts: 69
|
|
« Reply #23 on: February 13, 2010, 11:15:32 AM » |
|
1397cc
RCC ULTRA Plenum
RCC Custom One Off Twin-Entry Header
MicroSquirt Secondaries
Wossner 3/8" Rods
JE 84mm Turbo Pistons
R&D Tranny w/ billet 5th & 6th
Multi-Stage Lock-up, Billet Baskets
Pro-Mod Head & Main Studs
APE Lightened & Balanced Crankshaft (good to 14,000 rpms & removed balacer gear)
The entire motor is built. Turbo piston pins, V&H Timing Chain, Billet Everything.....LOL
Yes, over 18psi I will be shooting water/meth to get approx. 500HP on Pump gas
Looks good Joey, your 84mm, dual intakes, headwork and turbo seem to be the differences in our builds. When fo you expect to have it going or on the dyno. Can't wait to see the 18lb on pump #'s and then what you can achieve with the water injection and meth |
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #24 on: February 13, 2010, 11:24:52 AM » |
|
I will be building it slowly. I am using it to basically launch my business. So I will be doing a lot of YouTube videos for every product I use and the assembly. So you can really "SEE" the entire build. Actually building a studio right now and as funds permit, acquiring better camera equipment and lighting. Which will coinside with the launching of my shopping cart website. Looks like it will take a while, but you will get to see it all.
|
|
|
|
« Last Edit: February 13, 2010, 11:26:37 AM by 1BADASSBUSA »
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
ACE23
Full Member
Karma: +0/-0
Offline
Posts: 69
|
|
« Reply #25 on: February 13, 2010, 06:53:16 PM » |
|
I will be building it slowly. I am using it to basically launch my business. So I will be doing a lot of YouTube videos for every product I use and the assembly. So you can really "SEE" the entire build. Actually building a studio right now and as funds permit, acquiring better camera equipment and lighting. Which will coinside with the launching of my shopping cart website. Looks like it will take a while, but you will get to see it all.
Sounds pretty interesting overall and I will be looking forward to it . What's behind your logic of using twin intake cams with such a large turbo and higher displacement? |
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #26 on: February 13, 2010, 08:32:33 PM » |
|
That's the way the setup is meant to work is pumping as much exhaust out as possible, to spin the turbo. I will try other cam combinations, but this is what I am starting with. My goal is 500HP on Pump Gas, 700HP Street Bike. I'll be happy with that... |
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
ACE23
Full Member
Karma: +0/-0
Offline
Posts: 69
|
|
« Reply #27 on: February 13, 2010, 11:23:57 PM » |
|
That's the way the setup is meant to work is pumping as much exhaust out as possible, to spin the turbo. I will try other cam combinations, but this is what I am starting with. My goal is 500HP on Pump Gas, 700HP Street Bike. I'll be happy with that... 500hp on pump is freakish.... I remember Richard saying he has ran them on 22lb on pump I believe....made like 430hp but ended up burning some pistons. With your much different setup and Water/meth.... It just might happen. Awesome keep us posted |
|
|
|
|
Logged
|
|
|
|
|
|
|
BATTMAN
|
|
« Reply #29 on: March 14, 2010, 01:08:53 PM » |
|
any updates on this project??
|
|
|
|
|
Logged
|
|
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #30 on: March 14, 2010, 01:16:59 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #31 on: March 15, 2010, 12:44:06 PM » |
|
Jay's bike is almost done, should be running Saturday!!!!!! |
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #32 on: March 15, 2010, 06:27:28 PM » |
|
i ran it all last year but just doing a few new things to it this year
|
|
|
|
|
Logged
|
|
|
|
|
BATTMAN
|
|
« Reply #33 on: September 25, 2010, 11:33:00 AM » |
|
any updates
|
|
|
|
|
Logged
|
|
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #34 on: September 25, 2010, 12:44:15 PM » |
|
its been running great for 2 years now
12psi on pump gas its my daily driver get on it and ride any where i want to
|
|
|
|
« Last Edit: September 25, 2010, 01:27:31 PM by atticdog »
|
Logged
|
|
|
|
|
BATTMAN
|
|
« Reply #35 on: September 25, 2010, 03:23:45 PM » |
|
Im thinking about getting a W/A plenum over the winter. Im having some cooling issues now and its the end of sept.
|
|
|
|
|
Logged
|
|
|
|
1BADASSBUSA
Adrenaline Junkie
Site Sponsor
Hero Member
Karma: +7/-0
Offline
Posts: 261
|
|
« Reply #36 on: September 25, 2010, 05:28:48 PM » |
|
Im thinking about getting a W/A plenum over the winter. Im having some cooling issues now and its the end of sept.
I just built a stage 3 with A/A intercooler for a customer, no cooling issues at all. But when I rane a/a intercooler on my 1400cc busa it rane very hot. W/A Intercooler should fix your issue, less of radiator covered. |
|
|
|
|
Logged
|
JOEY RCC Stage II BUSA 480HP RPM Custom BUSA 700HP+ RCC Stage III GSXR1000 310HP |
|
|
atticdog
MS users
Hero Member
Karma: +3/-1
Offline
Posts: 427
RIP DaveO my friend
|
|
« Reply #37 on: September 25, 2010, 10:35:12 PM » |
|
I have a stock thermostat with a gen 2 radiator and it never went over 1/2 mark even in 95+ sitting in traffic
|
|
|
|
|
Logged
|
|
|
|
|
